Base Fabric Type Polyester
Base Fabric Weight (nominal) 6.0 oz/yd2
Finished Coated Weight 22 oz/yd2
ASTM D751 +2/-1 oz/yd2
Tongue Tear 8" x 10" sample @ 12"/minute
ASTM D751 150/150 lbf
Grab Tensile
ASTM D751		 450/450 lbf
Strip Tensile
ASTM D751 Procedure B		 325/300 lbf /in
Adhesion
ASTM D751 RF Weld		 10 lbf /in
Hydrostatic Resistance
ASTM D751 Procedure A		 500 psi
Low Temperature 1/8 in mandrel, 4 hr
ASTM D2136 LTC: Pass @ -40° F
LTA: Pass @ -67° F
Flame Resistance Sample not consumed
FMVSS 302 Pass 4 in/min.
Roll Specifics Width up to 75 in.
Length 110 yd.

Unless stated otherwise, values presented above represent the minimum expected measurements at the time of manufacture. We believe this information is the best currently available on the subject. We offer it as a suggestion in any appropriate experimentation you may care to undertake. It is subject to revision as additional knowledge and experience are gained. We make no guarantee of results and assume no obligation or liability whatsoever in connection with this information.

Issued November 2006




home | product specifications | samples & info | links | www.seamancorp.com | legal info
Seaman Corporation | 1000 Venture Boulevard Wooster, Ohio 44691 | Phone 800-927-8578 · 330-262-1111 · Fax 330-263-6950