| Base Fabric Type |
Polyester |
| Base Fabric Weight (nominal) |
3.0 oz/yd2 |
|
|
| Finished Coated Weight |
7 oz/yd2 |
| ASTM D751 |
+2/-1 oz/yd2 |
|
|
| Tongue Tear |
8" x 10" sample @ 12" /min |
| ASTM D751 |
100/100 lbf |
|
|
Grab Tensile
ASTM D751 |
230/200 lbf |
|
|
Strip Tensile
ASTM D751 Procedure B |
200/140 lbf /in |
|
|
| Low Temperature |
1/8 in mandrel, 4 hr |
| ASTM D2136 |
Pass @ -40° F |
|
|
Flame Resistance
FTMS 191-Method 5910 |
Sample not consumed within 2 minutes |
|
|
Unless stated otherwise, values presented above represent the minimum expected measurements at the time of manufacture. We believe this information is the best currently available on the subject. We offer it as a suggestion in any appropriate experimentation you may care to undertake. It is subject to revision as additional knowledge and experience are gained. We make no guarantee of results and assume no obligation or liability whatsoever in connection with this information.
Issued October 2002
|
